brake torque
英 [breɪk tɔːk]
美 [breɪk tɔːrk]
制动转矩；制动力矩；制动扭矩
双语例句
- Dynamic and thermal brake torque characteristics of the larger.
热动和制动转矩较大等优良的特性。 - It is small, compact structure, the brake torque, braking short time, braking performance and stability, high temperature friction pad installed adjustment convenient features.
它具有体积小、结构紧凑、制动力矩大、制动时间短、制动性能稳定、摩擦衬垫耐高温、安装调整方便等特点。 - Anti-lock braking system automatically controls the brake torque of each wheel to prevent it from getting locked in the process of braking.
汽车防抱制动系统通过在制动过程中自动控制车轮的制动力矩，从而防止了车轮抱死。 - Optimal Brake Torque Distribution for A Four-Wheel Drive Hybrid Electric Vehicl Stability Enhancement
优化制动转矩分布以提高四轮驱动混合电动车辆的稳定性 - Research on power index model of average brake torque for drum brake
鼓式制动器平均力矩的幂指数模型研究 - The brake torque not only relates to the brake force and friction coefficient of mated parts, but also to the contacting condition of mated parts.
指出，制动力矩不仅与制动驱动力和摩擦副的摩擦系数有关，而且还与摩擦副的接触状况有关。 - Heavy duty trucks are urgently demanded for greater brake power because the vehicle gross is increased, average brake speed is raised and the power/ mass ratio is enhanced. That materially embodies on how to improve drum brake torque of manufactured produce and service vehicle.
重型载货车因整车总量增加、平均车速提高、比功率增加而迫切需要更大制动力，具体体现在如何提高现生产的制动器和现使用的重型载货车制动器的实际输出制动力矩。 - The calculations of structure parameters, transmission ratio, torque of each shaft, brake torque, locking moment, and transmission power are explained here.
文中阐述了行星齿轮变速箱的结构参数计算，各档的传动比计算，各构件的转矩、制动转矩和闭锁力矩计算，以及各档的传动效率计算。 - This paper elaborates the relation between K& the multiple of the brake torque of mine hoist and the mass coefficient μ of hoisting system. The way chosen of the K value and rectification of oil pressure of hydraulic disc brake system have been discussed.
阐述了矿井提升机制动力矩倍数K与提升系统质量系数μ的关系，探讨了K值的选取和液压盘式制动系统油压的整定方法。 - On the basis of theoretical calculations the factors influencing the brake torque in disk and drum type brakes are studied in this paper.
通过理论计算，分析了影响盘式和鼓式制动器制动力矩的因素。 - While working diameter and working distance of the brake has obvious effect on the brake torque, so in the design, these two parameter should be emphasized.
而制动器的工作直径、工作间隙对磁流变液制动器的制动力矩有明显的影响，所以在设计中应重点考虑这两个参数。 - The results show that during braking both the brake torque and its variation rise.
试验研究表明，制动过程中制动力矩均值及其波动值逐渐增大。研究结果表明：I。 - The carrying ability for rapid dislocation of parts and brake torque for different locking force in laser coordinatograph are analyzed and calculated. Experiments show that measurements agree with the theory.
本文根据摩擦原理，分析和计算了激光坐标仪中快速解脱件的承载能力，以及在不同锁紧力情况下所产生的扭矩，测试结果与理论计算符合。 - Study on the Brake Torque and Temperature-rise of Electromagnetic Brake
客车电磁缓速制动器的制动力矩与温升研究 - The methods for measuring control force and brake torque of the motorcycle brake are introduced and the factors affecting precision are analysed.
介绍了摩托车制动器操纵力和制动力矩的测量方法，分析了对测量精度的影响因素。 - In a certain range of temperature, temperature has little effect on the brake torque;
在一定的温度范围内，温度对磁流变液制动器的制动力矩影响不大； - It is pointed out that during emergency braking on shaft hoists, the built-up time of brake torque has considerable influence on the formation of dynamic tension in the hoisting ropes.
本文指出当矿井提升机紧急制动时，制动力矩的建立时间将对钢丝绳中的动张力产生相当大的影响。 - Analysis to Method for Monitoring Brake Torque of Hoist
提升机制动力矩监测方法分析 - Based on recursive orthogonal test method, the average brake torque is measured by using brake dynamometer. Test is performed according to two-level orthogonal table with speed and pressure as test factors.
在制动器惯性试验台上，通过回归正交试验方法，选用速度和压力两个因素，按照两水平正交表进行平均力矩测试试验。 - The theoretical formula for calculating the maximum dynamic tension of hoisting rope are derived when it is considered as an elastic continuum and the built up time of brake torque is taken into consideration.
导出了考虑制动力矩建立过程且把钢丝绳视为连续弹性体时钢丝绳上最大动张力理论计算公式。 - Rig Test Study on Brake Torque Variation
制动力矩波动台架试验研究 - Through stress analysis to brake wheel, it is clear that brake force of the vehicle is not only concerned with brake torque of wheel brake and static radius of tyre, but also restricted by adhesiveness between tyre and the ground.
通过对制动车轮的受力分析，明确了车辆的制动力与车轮制动器的制动力矩和轮胎的静力半径有关，同时又受轮胎与地面间附着性能的制约。 - A new type of servo brake which provides a increased brake torque by a roller and a wedge structure, whose advantages are its ideal force on brake shoes and even wear, has been developed.
研制了一种利用滚柱并通过楔形结构实现制动增力的新型增力式车轮制动器，该结构可使制动蹄受力合理、磨损均匀，为中、重型汽车采用液压制动提供了有效的途径。 - This paper analyses dynamic feature of vehicle brake and expounds relations between brake torque, brake deceleration and adhesion coefficient on road surface.
分析了车辆的制动过程，阐述了制动力矩、制动减速度与地面附着系数之间的关系。 - The results show that disc side face run-out results in brake torque variation by means of disc thickness variation.
结果表明：制动盘端面跳动最终以虚拟制动盘厚度变化形式引起制动力矩的波动。 - The thesis puts forward the method of confirming brake torque, appoints that brake torque is decided by its own structure and parameter, and also presents computing method of stop force and emergency brake force.
提出了制动器制动力矩的确定方法，也指出了制动器的制动力矩是由其自身的结构和参数决定的，叙述了驻车和应急制动力矩的计算方法。 - The controller described here identifies the runway condition from the aircraft and the wheel responses, and modulates the brake torque for optimum braking.
控制器识别飞机和机轮的速度反馈，从而调整刹车力矩实现优化刹车。 - By using ADAMS/ view, a simulation model of disk brake system was established and the brake torque variation due to disc side face run-out was analyzed.
利用adams软件，建立了盘式制动器的仿真模型，分析了在制动盘装偏情况下制动力矩波动情况； - The disc brakes have many advantages with more and adjustable brake torque, quick action, good thermal performance, easy use and maintenance.
而盘式制动装置具有制动力矩大且可调、动作灵敏、散热性能好、使用和维修方便等诸多优点。 - Based on the project of the vehicle transmission national key lab, this paper studies on optimizing design and brake torque control of hydraulic retarder.
本文基于车辆传动国家重点实验室基金项目，对大功率液力减速器的优化设计与制动力矩控制方法进行研究。